Mitel S720 Bluetooth Speakerphone


The Mitel S720 Bluetooth Speakerphone is supported with Mitel MiVoice 6920, 6930 and 6940 IP phones that allows you to instantly transform any room into a conference room. 

You can easily connect and enjoy the crystal clear HD audio, while maximizing productivity during conference calls through this premium portable and easy-to-use Bluetooth speakerphone.

 


Features:

• HD voice audio 

• Omni directional microphone 

• Functionally integrated with desk phone - volume / mute sync, pulling call to / from conference phone 

• Connect two speakerphones wirelessly to extend speakerphone range and for stereo music playback 

• Play smartphone audio from mobile with auto pause when incoming call to desk phone 

• Intuitive connectivity through Bluetooth®

• Portable design, protective travel pouch, and battery powered with USB charging (15 hours of talk time) 

• Flexible and scalable for office side tables and small meeting rooms


How to use:


The buttons are backlit and only visible when the speakerphone is powered on. 

After one minute of inactivity the buttons will fade, and can be reactivated by tapping the area where the buttons are located. 

The button, button, and button will only be visible under certain conditions (that is, the button is only visible when the speakerphone is in close proximity to another speakerphone). 

Connecting to the Mitel MiVoice 6920 IP Phone The Mitel MiVoice 6920 IP phone supports the option of connecting a Mitel S720 Bluetooth Speakerphone using the Mitel S720 USB BT Adapter. 


Perform the following steps to connect the Mitel S720 Bluetooth Speakerphone to a Mitel MiVoice 6920 IP phone: 

1. Download and install the Jabra Direct application on your PC. 

2. Plug the S720 USB BT Adapter into your PC. 

3. Turn on the speakerphone and press and hold the Bluetooth button on it to bring it into pairing mode. 

4. Use the Jabra Direct BT pairing feature to find and pair the speakerphone with the S720 USB BT Adapter (which will appear as the Jabra Link 370). 

5. Once successfully paired, unplug the S720 USB BT Adapter from your PC and plug it into the USB port at the back of your 6920 IP Phone. 

After successful connection, you can move calls the Mitel S720 Bluetooth Loudspeaker Phone.


Pairing to the Mitel MiVoice 6930 IP phone

To pair the Mitel S720 Bluetooth Speakerphone to the Mitel MiVoice 6930 IP phone:

1. Press the key on the IP phone to enter the Settings menu. 

2. Navigate to the Bluetooth menu and press the Select button or Select softkey. 

3. Ensure Bluetooth functionality is enabled.

 If it is not enabled, press the Turn On softkey to enable Bluetooth functionality. 

4. Press and hold the Bluetooth button on the speakerphone (the voice prompt directs you to go to the Bluetooth menu on your device).

5. Press the down navigation key to view the list of Available Devices. 

6. Press the right navigation key to move to the Bluetooth device selection column. 

7. Using the up and down navigation keys, select S720 BT Speakerphone and press the Pair softkey. 

The phone pairs the speakerphone and automatically connects it. 

8. Press OK to acknowledge the successful connection. 

The MWI indicator flashes blue and the speakerphone announces “Device Connected” when successfully connected. Pairing to the Mitel MiVoice 6940 IP phone

To pair the Mitel S720 Bluetooth Speakerphone to the Mitel MiVoice 6940 IP phone: 

1. Press the key on the IP phone to enter the Settings menu.

 2. Tap the Bluetooth icon. 

3. Ensure Bluetooth functionality is enabled. 

If it is not enabled, swipe the Bluetooth toggle switch (located at the top right of the screen) to the right to enable Bluetooth functionality. 

4. Press and hold the Bluetooth button on the speakerphone (the voice prompt directs you to go to the Bluetooth menu on your device). 

5. Tap Available Devices to view the list of discoverable Bluetooth devices. 

6. Tap S720 BT Speakerphone to start the pairing process. 

The phone pairs the speakerphone and automatically connects it. 

7. Tap OK to acknowledge the successful connection. 

The MWI indicator flashes blue and the speakerphone announces “Device Connected” when successfully connected.


Pairing to a smartphone

 You can use the Mitel S720 Bluetooth Speakerphone with your Mitel MiCollab Mobile Soft Client on your smartphone. By pairing your smartphone with the Mitel S720 Bluetooth Speakerphone you can also use your smartphone’s music player to listen to music on the speakerphone. Incoming calls to your smartphone or desk phone will automatically pause the music playback so you can handle the call. Music playback will automatically resume once the call has ended. 

To pair the Mitel S720 Bluetooth Speakerphone to your smartphone: 

1. Tap and hold the  button on the speakerphone for 2 seconds and follow the voice-guided instructions to pair to your smartphone.

Linking two Mitel S720 Bluetooth Speakerphones 

You can link two speakerphones: 

• To extend conference room pick-up to 12 participants 

• For stereo music playback at your desk 

To extend conference room pick-up to 12 people: 

1. Place the two speakerphones within 2m (6.5ft) from each other. 

2. Pair one of the speakerphones to the IP phone in the room. 

3. Link the second speakerphone by tapping the Link button on both speakerphone

To play stereo music from two Mitel S720 Bluetooth Speakerphones:

1. Pair one of the speakerphones to the IP phone. 

2. Pair your smartphone to the second speakerphone. 

3. Link the two speakerphones by tapping the button on both speakerphones.


Where to position

Small meeting room 

Position the Mitel S720 Bluetooth Speakerphone in the center of the table, up to 2m (6.5ft) from each participant. 

A single speakerphone is ideal for up to six people. 

Desk 

When using the Mitel S720 Bluetooth Speakerphone at your desk, it is recommended that you place the speakerphone into an upright position using the table stand. 

This will better direct the audio towards you.

 Call handling 

Moving call audio between the IP phone and the Mitel S720 Bluetooth Speakerphone 

To move call audio between the IP phone and the Mitel S720 Bluetooth Speakerphone: 

1. Tap the button on the speakerphone to move the call audio to the speakerphone after answering or making a call on the IP phone.

2. Press the key or lift the handset on the IP phone to move the call audio back to the IP phone.

 

Answering an incoming call directly on the Mitel S720 Bluetooth Speakerphone 

To answer an incoming call directly on the Mitel S720 Bluetooth Speakerphone: 

• Tap the button on the speakerphone to answer an incoming call directly while it is ringing.

Multiple call handling 

• To put a current call on hold and answer an incoming call, tap the button on the speakerphone.

• To switch between held call and an active call, tap the  button on the speakerphone.

• To reject an incoming call and continue with the current call, tap the button on the speakerphone.


Call Handling on MiCollab PC Client through the Mitel S720 Bluetooth Speakerphone 

You can set up the Mitel S720 Bluetooth Speakerphone to support call accept, end, mute, and volume control for the MiCollab PC Client application. 


To set-up a Mitel S720 Bluetooth Speakerphone for MiCollab Client: 

1. Power on the S720 speakerphone. 

2. Ensure that the speakerphone is plugged into a USB port on your PC or is connected to your PC through the Jabra Link 370 USB Bluetooth Adapter. 

If not connected, tap and hold the button on the speakerphone and click Connect on the Jabra Link 370 from the Bluetooth menu on your PC.

3. Go to sound settings on your PC, navigate to the Playback tab and select S720/Jabra Link S730 as the Default Communications Device. 

4. In the Recording tab, select S720/Jabra Link S730 as the Default Communications Device. 

5. On your MiCollab Client, navigate to Settings > Call Settings > Playback Ringtone/Ringback to select the preferred device mode. 

To make, receive or end call: 

1. Ensure to set Softphone as the default calling mode on your MiCollab Client. 

2. Place a call using your MiCollab Client. 

The audio and microphone is provided by the S720 speakerphone. 

3. During an incoming call, the ringing is played through the device selected (Default Device or Default communication device) for Playback Ringtone/Ringback in MiCollab Client settings. 

4. To receive a call, tap the green button on the speakerphone. 

5. To adjust the volume, tap the + or - button on the speakerphone. 

6. To end the call, tap the red button on the speakerphone.

 Charging 

Plug the Mitel S720 Bluetooth Speakerphone to the USB port of the IP phone or other powered USB port (for example, a USB port on a PC or USB AC Adapter 7 W minimum) using the USB cable. 


Viewing battery status 

To view the battery status, tap the button.

 The LEDs around the edge of the Mitel S720 Bluetooth Speakerphone light up to indicate the current battery status. Maximum battery 

Low battery

 

Automatic power off 

To preserve battery while unplugged, the Mitel S720 Bluetooth Speakerphone automatically powers off when it is not connected to a Bluetooth device for 15 minutes. 

If connected to a Bluetooth device and unplugged, it automatically powers off after 8 hours. 


Jabra Direct 

Jabra Direct is a PC software application designed to support, manage and enable optimal functionality for Jabra devices. 


Jabra Direct is used to update the Mitel S720 Bluetooth Speakerphone firmware. 

You can download the latest Jabra Direct PC software application from Jabra.com/direct. 


Update firmware 

To update the firmware of the Mitel S720 Bluetooth Speakerphone: 

1. Connect the Mitel S720 Bluetooth Speakerphone to a PC using the USB cable. 

2. Install Jabra Direct on your PC. 

3. Use Jabra Direct to check for the lastest firmware updates. 

How to care 

• The Mitel S720 Bluetooth Speakerphone is for indoor use only. 

• Avoid storage at extreme temperatures (above 65°C/149°F or below -40°C/-40°F). 

• Do not expose the Mitel S720 Bluetooth Speakerphone to rain or other liquids. 

• Do not cover the Mitel S720 Bluetooth Speakerphone with stickers or labels. 

Factory reset Resetting the Mitel S720 Bluetooth Speakerphone clears its list of paired Bluetooth devices and also clears all personalized settings. 

After a factory reset, it is necessary to re-pair the Mitel S720 Bluetoorh Speakerphone to your Bluetooth devices. 

To factory reset, hold the button and the button for 8 seconds until ‘Factory reset’ is announced by the speakerphone.